Author Message

<  Hobby Section  ~  ApeBot and Silverager sizes?

PostPosted: Tue Nov 23, 2010 5:29 am
MortalPosts: 5Joined: Tue Nov 23, 2010 5:23 am
Hi all,

I've been admiring the Pulp City stuff for a while now, and I am very tempted to buy Apebot and Silverager for a project I'm working on.

I was wondering whether anyone could tell me whether these two are roughly the same size or not, and how high are they to their eye line? It's so hard to judge from pictures with no point of comparison.

Many thanks in advance,
Virral


Offline Profile
PostPosted: Tue Nov 23, 2010 8:21 am
User avatarGuardian of PulpPosts: 4526Location: House of Jade LanternsJoined: Thu Aug 09, 2007 11:16 am
To their own eyelines, heights are very similar, and to top of raised arms (Silverager's cyber arms) there is only a few mm in difference. Apebot is much bulkier by design, but they look to complement each other very well (mine sit side by side in my cabinet).


Last edited by pulpcitizen on Tue Nov 23, 2010 8:36 am, edited 1 time in total.


_________________
Pulp Citizen (blog): link
Hairy sticking: TINY!; Red Bella; Slug Muldoon; Painted 154 Pulp City minis;
Offline Profile WWW
PostPosted: Tue Nov 23, 2010 8:32 am
User avatarGuardian of PulpPosts: 1536Location: SE KansasJoined: Mon Aug 06, 2007 9:14 am
I'll take a picture tomorrow evening for you.



_________________
Bob Nolan

Now Accepting Commissions!

My Blog: Pen and Lead
Offline Profile WWW YIM
PostPosted: Tue Nov 23, 2010 9:14 am
MortalPosts: 5Joined: Tue Nov 23, 2010 5:23 am
Thanks guys, really appreciate it.

I'm wondering if they'll fit in with this guy from Darkson Designs. He's 48mm to the top of his head. They don't need to be exactly the same size, but I'm hoping they'll be either roughly the same or a bit smaller.

Image


Offline Profile
PostPosted: Tue Nov 23, 2010 9:27 am
User avatarGuardian of PulpPosts: 4526Location: House of Jade LanternsJoined: Thu Aug 09, 2007 11:16 am
If mounted upright, Silverager is around 45 mm (excluding base) to the top of his head, and 47-48 mm for Apebot (excluding base).

Also, Ape-X from Reaper comes in around 50 mm to the top of his head.



_________________
Pulp Citizen (blog): link
Hairy sticking: TINY!; Red Bella; Slug Muldoon; Painted 154 Pulp City minis;
Offline Profile WWW
PostPosted: Wed Nov 24, 2010 10:13 am
User avatarGuardian of PulpPosts: 2139Location: Maine U.S.A.Joined: Mon Sep 17, 2007 6:52 am
Welcome to the forums Virral! Glad to have you here! As Leon said the sizes are pretty similar between Silverager and ApeBot. The Storm Ape is mounted on the same size base if I recall correctly so that means he'll be a much burlier sort of model. Just FYI.



_________________
Pulp City Lead Troubleshooter
Offline Profile
PostPosted: Thu Nov 25, 2010 5:58 am
User avatarSuper HeroPosts: 658Location: Spirit of Pulp CityJoined: Thu Aug 02, 2007 6:09 pm
Hope this picture helps you out.

Image



_________________
-Joel

My Gaming Blog
http://miniaturemayhem.net/
My Activity Log: Nothing right now. House is still being renovated... :(
Offline Profile WWW
PostPosted: Thu Nov 25, 2010 7:08 am
User avatarGuardian of PulpPosts: 2139Location: Maine U.S.A.Joined: Mon Sep 17, 2007 6:52 am
That picture is excellent! All kinds of Monkey goodness right there!



_________________
Pulp City Lead Troubleshooter
Offline Profile
PostPosted: Fri Nov 26, 2010 8:53 am
MortalPosts: 5Joined: Tue Nov 23, 2010 5:23 am
That picture is mind-blowingly helpful, thank you so much :D

That settles it, I'm getting 'em! Does anyone know when the store is going back online?


Offline Profile
PostPosted: Fri Nov 26, 2010 12:41 pm
User avatarGuardian of PulpPosts: 1536Location: SE KansasJoined: Mon Aug 06, 2007 9:14 am
Virral wrote:
That picture is mind-blowingly helpful, thank you so much :D

That settles it, I'm getting 'em! Does anyone know when the store is going back online?


Just got an email a couple of hours ago and still working no the finishing touches. Sorry. :(



_________________
Bob Nolan

Now Accepting Commissions!

My Blog: Pen and Lead
Offline Profile WWW YIM
PostPosted: Sat Nov 27, 2010 7:49 am
User avatarMortalPosts: 24Joined: Mon Sep 20, 2010 8:50 pm
There is the possibility of order via email to Morf directly

Here the Link to the Thread
viewtopic.php?f=1&t=1496

Maybe its helpfully

My first mail lands in the spam-filter of MORF so I send him a PM after a while.
nowstill waiting but it is just just a few days ago.

Nirmo


Offline Profile
PostPosted: Tue Nov 30, 2010 3:47 am
MortalPosts: 5Joined: Tue Nov 23, 2010 5:23 am
Thanks for the link, although unfortunately ApeBot wasn't listed as being in stock :(

Maybe best for me to wait until the store is online again and restocked, since I also want some of the Iron Train figures, also currently out of stock I guess. Morf said stock will be back up around the end of November, so hopefully any day now.


Offline Profile

Display posts from previous:  Sort by:

All times are UTC [ DST ]
Page 1 of 1
12 posts
Users browsing this forum: No registered users and 1 guest
Search for:
Post new topic  Reply to topic
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
cron